Outdoor Managed Switch Product Description:
ETH-DIMC2416M series is a L2+ managed hardened Ethernet switch that puts immense versatility at your fingertips. It has sixteen 10/100/1000Base-T RJ45 ports and four 1000Base-X SFP ports, giving it impressive connection options. The RJ45 ports can be used for 10/100/1000Base-T(X) connections with full, half, or auto duplex modes for easy interoperability. The SFP ports are compatible with both single- and multi-mode cores and can be connected either one- or two-core.
For any application that requires linking the IP cameras, wireless access points and other network devices between remote locations, the ETH-DIMC2416M series is a reliable and straightforward solution. Its robust design and user-friendly configuration options make it a great choice for any network integration project.
Managed Switch Features:
This device is outfitted with 10/100/1000Mbps RJ45 port. It auto-negotiates between full and half-duplex, and also comes with auto MDI/MDIX. What's more, it supports 16x10/100/1000Base-T plus 4x1000Base-X SFP.
It can also be connected to the USB-C port for easier management, which eliminates the need to access the RS232 serial port.
To give an extra boost to the performance of large data transfers, it is equipped with 10K Bytes Jumbo Frame.
Industrial Managed Switch Technical Parameters:
| Interface |
| Connector: | 16 x RJ45 |
| RS485: | 1 x RS485 (Optional) |
| Optical Port: | 4 x 1000Base-X SFP |
| USB-C: | 1 x USB-C (for Management) |
| RS485 Serial Interface (Optional) |
| Physical interface | Industrial standard 3-pin screw terminal |
| Data type | 1Ch RS485 Bi-Direction |
| RS-485 signals | Data+, Data-, GND |
| Serial port line distance (copper) | 1000 meters |
| Baud rate | 0 ~ 800kbps |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
| Electrical and Mechanical |
| Input Power: | 48~57VDC, Redundant Power (6-pin Terminal Block) |
| Power Consumption: | 8W Max.(PoE in Use<480W) |
| Protection: |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| DIP Switch |
| 4-digit DIP switch function | DIP | Function | Settings |
| SW 1 | VLAN | ON - Enabled | OFF - Disabled |
| SW 2 | Ring Management | ON - Enabled | OFF - Disabled |
| SW 3 | Reserved | ON - Reserved | OFF - Reserved |
| SW 4 | Reserved | ON - Reserved | OFF - Reserved |
| LED Indicators: |
| PWR: | Power Status |
| Ethernet (Per Port): | Link/Activity |
| Fiber: | Gigabit SFP Port: F17~F20 |
| Dimensions (WxDxH): | 155 x 115 x 85 mm |
| Weight: | 1.2KG |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
| Software Features |
| Redundancy Protocols | Support STP/RSTP/MSTP/ERPSv2, Link Aggregation |
| Multicast Support | Support IGMP Snooping V1/V2/V3,support GMRP, GVMP,802.1Q |
| VLAN | Support IEEE 802.1Q 4K VLAN,support QINQ, Double VLAN, |
| Time Management | SNTP |
| QOS | Flow-based redirection Flow-based rate limiting
Flow-based packet filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
| ACL | Port-based Issuing ACL ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc |
| PoE Management | Total power limit of PoE power supply PoE output power allocation
PoE output priority configuration
PoE working status
Scheduling of PoE operation |
| Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
| Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE, LLDP, DHCP Server/Client (IPv4/IPv6), Cloud/MQTT |
| Alarm Management | Support 1 way relay alarm output, RMON, TRAP |
| Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 Support DHCP Snooping, Option 82,802.1X security access,
Support user hierarchical management, ACL access control list,
Support DDOS,port-based MAC filtering / binding, MAC black holes, IP source protection, Port isolation, ARP message speed limit |
| Advance Layer 2+ Features | IPv4/IPv6 Management Static Route |
Managed Switches Support and Services:
Ethernet Switch Technical Support and Service
At E-link, we understand the importance of providing quality technical support and service for our customers. Our Ethernet Switch is designed to provide reliable and efficient performance in any environment.
Our team of experienced engineers and technicians are available to answer any questions you may have about the Ethernet Switch. They can provide advice on installation, configuration, and troubleshooting, as well as provide hands-on support when needed.
We also offer online resources such as FAQs, user manuals, and product updates to help you get the most out of your Ethernet Switch.
If you have any questions about our Ethernet Switch or our technical support and service, please do not hesitate to contact us.
Gigabit Managed Switch Packing and Shipping:
Ethernet Switch Packaging and Shipping:
The Ethernet Switch is securely packaged in a cardboard box, which is then put into a shipping container. The package is labeled with the appropriate product information to ensure proper identification. The shipping container is then sealed and shipped to its destination.
Gigabit Managed Ethernet Switch Ordering Information:
| Model | Description |
| ETH-DIMC2416M | Layer 2 Industrial 16-Port 10/100/1000T + 4-Port 1000X SFP Managed Ethernet Switch |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. |
| Mounting Options | ► Default DIN Rail Bracket installed |
| Power Options | ► Power Supply is to be purchased separately. |
